How to setup Ubiquity Point to point.

Configuration Ubiquiti Nano Station

1. Ensure your Computer is connected via Ethernet to the NanoStation.
2. Configure the Ethernet adapter on your computer to a static IP address on the 192.168.1.x subnet.
3. Launch your web browser and enter https://192.168.1.20 in the address field.
4. The login screen will appear. Enter ubnt in the Username and Password fields. Select your Country and Language You must agree to the Terms of Use to use the product Click Login.

Setup the Master Device:

1. Go to the wireless page

• Select access point from the wireless mode.

• Enter a name for the wireless network from SSID

• Press change button

• It will ask you to change the default password, Enter the old password, choose a new strong password, and confirm it in verify the new password.

• After pressing change, the apply changes will appear on the top of the screen, press apply.

Setup the Slave Device:

1. Go to the wireless page

• Select Station from the wireless mode.

• Enter the master wireless name in SSID, and the MAC address of the master device in Lock to AP

• Press change button

• It will ask you to change the default password, Enter the old password, choose a new strong password, and confirm it in verify new password.

• After pressing change, the apply changes will appear on the top of the screen, press apply.