Learning in wireless devices to the solution 3000

Using an ICON codepad

Add RF Device (Zone)

1. Enter the Installer Code, followed by [0] and the [#] key (for example, [12340#]).

2. Enter the device number (1 to 16) you want to add, followed by the [#] key.

3. Enter the RF device ID manually or switch to auto mode.

– In manual mode, enter the 9-digit RF device ID number, followed by the [#] key.

– Press [#] key to switch to auto mode. When icon numbers (1 to 16) flash, trigger the sensor to learn it into the panel. 

The panel learns the RF device ID number and the last digit of RFID number displays on the codepad. Press [#] key to confirm the operation.

4. Enter [#] key to accept the default value for the RF zone input option. Or enter a different

zone input option(table below) (0 to 15), followed by the [#] key.

Add RADION Keyfob

1. Enter the Master Code, followed by [1] and the [#] key (for example, [25801#]).
2. Enter the RADION keyfob number (301 to 332) you want to add (301 = keyfob 1, 302 =
keyfob2, etc.), followed by the [#] key. Up to 32 RADION keyfobs can be added, but only
current keyfob number (1 to 16) displays through zone indicators on the ICON codepad.
3. Use manual mode or auto mode to configure RADION keyfob RFID.
– In manual mode, enter the 9-digit RF device ID number, followed by the [#] key.
– Or press [#] key to switch to auto mode. When icon numbers (1 to 16) flash, press
button 1 or 2 of the keyfob. The panel learns the RADION Keyfob ID number and the
last digit of RFID number displays on the codepad. Press [#] key to confirm.

Add RF Repeater (B810)
1. Enter the Installer Code, followed by [0] and the [#] key (for example, [12340#]).
2. Enter the point ID of RADION Repeater (822 to 829) you want to add (822 = 1,823 = 2,etc.), followed by the [#] key. Repeater number (1 to 8) displays on the ICON codepad.
3. Use manual mode or auto mode to configure Repeater RFID.
– In manual mode, enter the 9-digit RF Repeater ID number, followed by the [#] key.
– Or press [#] key to switch into auto mode. When icon numbers (1 to 16) flash, tamper the RF Repeater. 

The panel learns the RF Repeater ID number and the last digit of RFID number displays on the codepad. Press [#] key to confirm.
4. Enter [#] key to confirm the operation, or enter [*] to cancel.

Using an Alphanumeric codepad or Touchscreen

Add RF Device
1. Enter the Installer Code, followed by [0] and the [#] key (for example, [12340#]).
2. Enter the zone (device) number (1 to 16) you want to add, followed by the [#] key.
3. Enter the RF device manually or switch to auto mode [*] key.
– In manual mode, enter the 9-digit RF device ID number.
– In auto mode [*] trigger the sensor to learn it into the panel. The codepad will display RFID number.
4. Press [#] to confirm the operation.

Add RADION Keyfob

1. Enter the Master Code, followed by [1] and the [#] key (for example, [25801#]).
2. Select the user, followed by the [#] key. Up to 32 RADION keyfobs can be added.
3. Select RF keyfob, use manual mode or auto mode to configure RADION keyfob RFID.
– In manual mode, enter the 9-digit RF device ID number, followed by the [#] key.
– Or press [*] key to switch to auto mode. On the top right you will see [A]. 

press button 1 or 2 on the keyfob. The panel learns the RADION Keyfob ID number and the RFID numbers will be displayed on the codepad. Press [#] key to confirm.

Powered by BetterDocs

Error message here!

Forgot your password?

Have an account with us?

Request a web portal login now.

Request account



Dont have an account with us?

Start an account with us today


Close

Lost your password? Please enter your email address. You will receive a link to create a new password.

Error message here!

Back to log-in

Close